The cards are 3.5" x 2" (standard size)
The Border should be 1/8" extra around all four sides.  
There will be no charge if art is correctly sent at correct size.
The bleed should be 3.6" x 2.1"

Art must be a PC Based eps or tiff file with either spot colors or process
colors as CMYK, not RGB. (RGB is used for a desk top printer or on screen
viewing only, not professional printing)

Ideally, we would prefer CorelDraw, Illustrator or EPS vector Files, or for full color- we prefer Photoshop.

Artwork should be no less than 600 dpi for best quality.

The area you will see after printing is the white and the yellow. The red area on the diagram is where the excess "bleed" would be. We will cut the cards right on the line between the red and the yellow. So if you have an image "bleeding" off the card, we need it to extend into the
red area to allow us ample room to cut. The whole image basically will fill up the whole card, the white, yellow and red area, but only the red area will be cut off. A bleed is approximately an additional 10%. Artwork sent with anything past the white guideline will be assumed a bleed and will be charged the additional bleed fee.

Also, allow room away from the outside edge of the cards even if you are not bleeding an image (do not put the text right up against the red/yellow border. Move the text well inside that area, preferably in the white area only. This will insure that none of the text is cut off. If the type is touching the yellow area, it may be cut off when the cards are trimmed after printing; therefore, artwork sent with anything past the white guideline will be assumed a bleed and will be charged the additional bleed fee unless you state otherwise.

If  sending CorelDraw, Illustrator or EPS files, please save text as "outlines" so we don't have font problems.
Please zip the image if possible to compress it. Then send art to: referencing your purchase order number in the 
subject line.

top